
Lower saw The lower saw wheel and integral pulley wheel is likewise mounted on double
wheel bearings, onto an axle that is mounted to a fixed base plate. The base plate, triangular
in shape, is bolted to the rear face of the lower saw wheel compartment. There are no
adjustment mechanisms for the lower saw wheel. Mounted on a fixed shaft on a fixed
base it is the base parameter that the rest of the saw is set against.
Drive belt The drive belt tensioning idler wheel, is mounted on a stub axle assembly.
tensioning The idler wheel adjusting knob, is connected to a threaded rod which is engaged in
idler wheel the stub axle assembly. Remember; the idler wheel should be against the outside
of the belt, (see fig 10d) slightly tension the belt by turning the idler wheel
adjusting knob clockwise.
Dust extraction A 100mm diameter dust extraction outlet.
outlet
On/Off Button The On/Off buttons, fitted with the optional shroud, (see the initial assembly
and switch instructions).
shroud
Illustration and Parts Description
17
Comentários a estes Manuais