Axminster MJ12-1600 MK11 Especificações descarregar pdf (Página 10)

Install the support leg

1. Attach the support leg to steel plate extension table

with 2-M8x20 Hex head screws, washers and nuts.

And tighten them.

2. Adjust the support leg ensure the steel plate

extension table at the same lever with the cast iron

extension table.

Install the rip fence rail

1. Place 5-M8x25 square head screws, washers and

hex nuts onto major table and extension tables

(washers and nuts inside table). The nuts only need

to be turn a few turn so there is an adequate gap to fit

Install the rear extension table

the rip fence rail.

1. Attach the rear extension table to the rear portion of

major table with 2-M8x16 hex head screws washers,

2. Remove the left end cap of rip fence rail. Slide the

hex nuts.

slot on the rip fence rail over 5-bolts. Adjust each bolt

to fit the rail closely to table.

2. Place the bracket onto rear panel of saw base unit

with a M8x16 hex head screw, another end of bracket

3. Push the rail against the tables and hand tight each

mounted to rear extension table with a M8x16 hex

hex nut. The rail needs further adjustment.

head screw.

3. Align the rear extension 0.5mm lower than the major

4. Put the left end cap onto rail, and tighten it with taping

table.

screws.

Install the main blade elevation & angle

handwheel

1. Fitting the elevation handwheel(1) and angle

handwheel (2) onto the elevation and angle shaft.

2. Tighten the set screws with 3mm 'L' wrench.

Install the rear support rail

Attach the rear support rail onto the cast iron and

steel plate extension tables, with 4-M8x25 square

head screws, washers and nuts, tighten them.

Square Head

Screw

Rip Fence

Rail

Support Leg

Rip Fence Rail

Fig 5

Fig 8

Fig 6

Fig 7

Fig 9

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 36 37

Comentários a estes Manuais

Sem comentários

Axminster MJ12-1600 MK11 Especificações Página 10

Comentários a estes Manuais

Manuais e produtos relacionados com Serras circulares Axminster MJ12-1600 MK11