Axminster Router Elevator Especificações Página 1

Kit Code 717204Kit Code 717205Pro Router Table Kit Code 717127UJK MDF Table TopUJK Phenolic Table TopUJK Pro Cast Iron Table TopHole assembly instruct

General Safety Instructions101. Make sure that the operator has been properly trained and has read and understands the Owner’s Manual before operating

Assembly11UJK Router Table Leg Stand AssemblyStep 1 Locate the bag of bolts (M6x12mm) (1), at washers M6 (2), upright supports (A) and the upper sid

Assembly12Step 7 Locate the wheel support bracket (H), lineup holes in the bracket with the threaded holes to the base of the upright supports (A) and

Assembly13Fig 13Secure the end of the back plate to the lower support bracket (E) and then turn the stand upright.ERear Wheel AssemblyStep 10 Locate t

Assembly14Adjust the foot (4) until it’s level with the top of the wheel (a), see image below. Repeat for the other side.4Step 12 Turn the stand upri

Assembly15Fig 23UJK Router Table Top AssemblyThere are three router table tops that can be mounted to the stand the Cast Iron, Phenolic and MDF. The

Assembly16Step 3 Locate the ten countersink Phillips wood screws and screw them into the threaded holes beneath the MDF table insert recess. (See figs

Assembly17UJK Fence AssemblyFig 33-34Locking nutStep 2 Insert a grub screw into each threaded corner of the table insert, place a straight edge across

Assembly18Fig 39secure both brackets with M6 Hex screws (e), see fig 40. DO NOT OVERTIGHTENFig 40 Fig 41 PhOejStep 3 Loosen the two locking knobs bene

Assembly19Fig 45Q dStep 7 Locate the two locking handle knobs (a) and at washers (i). Line up the machined slots in the fence (K) with the two lockin

Index of Contents2IntroductionWarningThe symbols below advise that you follow the correct safety procedures when using this tool.Fully read manualand

Assembly20Step 10 Locate two ‘T’ bolts (d), fence spacers (c) and at washers (i). Slide the ‘T’ bolts into the fence (K) ‘T’ slot and position the bo

Overview Description21Mitre fencetoo restUJK leg stand frameRear wheelsUJK Phenolic router table topMobility wheelCutter holderMitre fenceFence Table

Mounting the Router2210mm Universal Aluminium Insert with Universal Base PlateThe information below is reproduced from the Axminster universal base pl

A M4x10mmB M4x12mmC UNF10 x1/2”D M5x16mmE M5x20mmF M6x16mmG M6x30mmH M6x12mmI M4x6mm7mm176mm1 2 3Universal Base PlateMounting the Router23

Operating Instructions24BEFORE ROUTING CONNECT THE MACHINE TO A DUST EXTRACTION SYSTEM. ALWAYS TURN ON THE DUST EXTRACTOR BEFORE STARTING THE ROUTER A

Parts Drawing/List25

Parts Drawing/List26Router Table & Stand Assembly (E Type)Index No Part No Description Size Qty1 3.22E+17 Router Table (813mm×610mm) 12 32240015 S

Parts Drawing/List27Continues Over...Index No Part No Description Size Qty37 906M05045 Round Head Screw M5×45 238 32240055 Tool Bracket 139 9145161802

Parts Drawing/List28Router Table Fence AssemblyIndex No Part No Description Size Qty1 32240032 Router Table Fence 905mm 127160032 Router Table Fence 7

Parts Drawing/List29Continues Over...Index No Part No Description Size Qty4 32240033 T-Bolt 85 9145162302 Flat Washer M8 106 939M08000B Lock Knob M8 8

What’s Included3Quantity Item Part Code 502536Bag 1 Containing:40 No Bolts (M6x12mm) 140 No Flat Washers M6 2 2 No Round Head Screws (M4

30Notes

Notes31

Axminster Tool Centre,Unit 10 Weycroft Avenue, Axminster, Devon EX13 5NGujktechnology.co.ukPlease dispose of packaging for the product in a responsibl

What’s Included4JIabcegfdMobility Wheel Assembly Mitre Fence Tool RestKQuantity Item Part Code 502536Rear Wheel Assembly IBag 2 Containing:

What’s Included5Quantity Item Part Code 5025371 No Fence K1 No Extraction Moulding L1 No Dust Shield M1 No Bag Containing N2 No Lock

What’s Included6UJK Fence AssemblyNd ebacf g hijKLMN O P Q

Optional Accessories7Continues Over...1) UJK Technology QuickStop(Code 502569) •A hinged stop to t the UJK Technology router tables.•An excellent dev

Optional Accessories8Code 717127Rating TradeTable Size 812 x 600mmTable Height 930mmFence Size 904 x 90mmDust Extraction Outlet 62mm UJK Technolog

Kit SpecificationGeneral Instructions for 230V Machines9Code 717205Rating TradeTable Size 812 x 600mmTable Height 930mmFence Size 904 x 90mmDust Ext