Axminster T-2000CK Instruções de Operação descarregar pdf (Página 8)

General Safety Instructions for 230V Machines

If the particle ﬁ lter starts to clog, this reduces the air

ﬂ ow and hence the machine becomes less efﬁ cient.

The particle ﬁ lter can be cleaned, by using an ‘M’ class

vacuum cleaner, clean the inside of the ﬁ lter.

Be aware that in dry air periods or areas, the movement

of the air through the machine can generate static

electric ﬁ elds. This is not normally a problem as the

machine is bonded together via its construction and

the whole is earthed back through the electrical supply.

Problems can occur with isolated items, such as stands or

hosing that

are insulated from the ground (standing on

rubber feet), suspended in the air etc.

If possible, try to connect everything together electrically,

to eliminate static shocks.

(Use the integral metal coil in ﬂ exible plastic hosing to

connect units together).

Try to route the power cable and the hosing away from

busy walkways.

Do not allow the inlet to become ‘dead ended’, or block

or restrict the outlet, this puts undue strain on the motor

and can lead to overheating.

NOTE: DO NOT FIT PLASTIC WASTE BAGS TO THIS MACHINE!

Please read through the section entitled Parts Identiﬁ cation and Description, this will enable you to more readily

identify those parts of the cyclone extractor.

Please note: some of this assembly procedure is best accomplished by two persons. Although

the tasks are not impossible, some of the items are heavy and awkward, and a mishandling

error could cause injury. Please think about what you are doing, your capabilities and your

personal safety. We have added the ‘two person symbol’ to any operation that we recommend

should be a two person task.

Unpack all the boxes and check all the components listed in the “What’s Included” section. If any parts or

components are missing, please contact our Customer Services Department using the procedures and telephone

numbers listed in our catalogue.

Please note: on occasions the packing list is not strictly adhered to. Please check all the boxes, packets

etc. to make sure that all the parts have been accounted for.

PLEASE RECYCLE ANY UNWANTED PACKAGING RESPONSIBLY!

Assembly

Model T-2000CK-200H

Code 508338

Rating Trade

Power 1.5kW (230V, 1ph)

Air Flow 2,300m³/hr

Noise Level 84dB @ 3m

Filter Area 7.4m²

Filtration 1 micron

Particle Size 1 micron

Hose Diameter 180mm x 1, 100mm x 2

Overall L x W x H 1,250 x 1,000 x 1,800mm

Weight 83kg

Speciﬁ cation

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 31 32

Comentários a estes Manuais

Sem comentários

Axminster T-2000CK Instruções de Operação Página 8

Comentários a estes Manuais

Manuais e produtos relacionados com Esfregão Axminster T-2000CK