Axminster T-2000CK Manual de Instruções descarregar pdf (Página 7)

Speciﬁc Safety for Dust Extractors

Keep the particle ﬁlter clean. The machine relies on its

ability to ‘blow’ air through the ﬁlter, to generate good

suction. If the particle ﬁlter starts to clog, this reduces the

air ﬂow and hence the machine becomes less efﬁcient.

The particle ﬁlter can be cleaned, by removing the rear

ﬁlter cover and using a vacuum cleaner, clean the inside of

the ﬁlter.

Be aware that in dry air periods or areas, the movement of

the air through the machine can generate static electric

ﬁelds. These are not normally a problem as the machine

is bonded together via its construction and the whole is

earthed back through the electrical supply; problems can

occur with isolated items, such as stands or hosing that is

insulated from the ground.

• If possible, try to connect everything together

electrically, to eliminate static shocks.

• Use the integral metal coil in exible plastic hosing to

connect units together.

• Try to route the power cable and the hosing away from

busy walkways.

• Do not allow the inlet to become ‘dead ended’, or block

or restrict the outlet, this puts undue strain on the motor

and can lead to overheating.

NOTE: ALWAYS USE MANUFACTURERS WASTE BAGS WITH THIS MACHINE!

Model T-2000CK

Rating Trade

Power 0.75 kW (230V, 1ph)

Air Flow 1,100m³/hr

Noise Level 80 dB @ 3m

Filter Area 3.8m²

Filtration 1 micron

Particle Size 1 micron

Hose Diameter 150mm x 1, 100mm x 2

Overall L x W x H 1,300 x 1,100 x 1,560mm

Weight 71kg

Speciﬁcation

Assembly Instructions

Please read through the section entitled Parts Identiﬁcation and Description, this will enable you to more readily

identify those parts of the cyclone extractor.

Please note: some of this assembly procedure is best accomplished by two persons. Although

the tasks are not impossible, some of the items are heavy and awkward, and a mishandling

error could cause injury. Please think about what you are doing, your capabilities and your

personal safety. We have added the ‘two person symbol’ to any operation that we recommend

should be a two person task.

Unpack all the boxes and check all the components listed in the “What’s Included” section. If any parts or components

are missing, please contact our Customer Services Department using the procedures and telephone numbers listed in

our catalogue.

Please note: on occasions the packing list is not strictly adhered to. Please check all the boxes, packets

etc. to make sure that all the parts have been accounted for.

PLEASE RECYCLE ANY UNWANTED PACKAGING RESPONSIBLY!

1 2 3 4 5 6 7 8 9 10 11 12 ... 25 26

Comentários a estes Manuais

Sem comentários

Axminster T-2000CK Manual de Instruções Página 7

Comentários a estes Manuais

Manuais e produtos relacionados com Esfregão Axminster T-2000CK