Axminster T-2000CK Manual de Instruções descarregar pdf (Página 8)

Assembly Instructions

Having unpacked the boxes, put all components where

they are readily to hand. Locate the motor assemby (1),

the upper and lower leg square tubes (2-3), cross support

brackets (4), leg connectors (5), angle brackets (6), 5/16"

button head Hex bolts (f) and 5/16" nuts (b).

Step 1 Place the motor assembly (1) upside down on

the ﬂoor, locate the three upper leg square tubes (2),

Note: one of them should have ﬁxings for mounting

the manometer (16). Line up the holes in the angled

end of this square tube with the pre-drilled holes in the

mounting plate next to the fan assembly outlet and

secure using two button head bolts (f) and 5mm Hex

key (l), see ﬁgs 01-02-03. Repeat for the remaining leg

supports. Repeat for the remaining square tubes (2).

Step 2 Locate the three leg bracket connectors (5) and

the lower leg square tubes (3), slide one of the connectors

down into one of the leg tubes (3) and line up the lower

two holes in the connector (5) with holes in the leg tube

and secure in place with button head bolts (f), see ﬁg 04.

Repeat the process as described above for the remaining

leg tubes (3).

Fig 02-03

Fig 04

NOTE: ONLY LIGHTLY TIGHTEN THE BOLT AT

THIS STAGE!

Step 3 Insert the square tubes (3 and 5) down into the

ends of each lower square tubes (2) and line up the holes,

see ﬁgs 5-6.

Fig 05

Fig 06

Fig 01

Mounting plate for the upper

leg square tube (2 )with

ﬁxings for manometer (16)

Holes for attaching

angle brackets (6)

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 25 26

Sem comentários

Axminster T-2000CK Manual de Instruções Página 8