Axminster TSCE-12R Manual de Instruções descarregar pdf (Página 16)

Extension Wing

Referring to Figures 4 and 5:

Hardware: (6)7/16”*1-1/2” Hex Cap Bolts,

(6)7/16” Lock Washers, (6) 7/16” Flat

Washers & (2) Extension Tables

Tools: 17mm Wrench, Straight Edge

1. Attach the left extension wing (A) (Figure.4) to

the table (B) with three each hex cap screws (E)

(Figure.5) lock washers (F) and flat washers

(G). so the extension wing can still be manually

adjusted but do not tighten.

2. Adjust the extension wing horizontally so the

front edge is flush with the front edge of the saw

table. Then, using the straightedge as

reference, adjust vertically so the tops of the

extension wing and saw table are flush.

3. Tighten the three extension wing mounting

screws.

4. Remove the mounting hardware (Fig. 5) from

the table on the right side; then attach the right

extension wing in the same manner.

Blade Installation/ Replacement

1. Disconnect machine from power source.

2. Raise the blade height all the way up and set

the blade tilt to 0° .

3. Remove the table insert.

4. Rotate the arbor to line up the slot (C) with the

arbor lock (D).

5. Press the arbor lock (D) in the direction shown

by the arrow to engage it into the slot (C) in the

arbor. At the same time remove the arbor nut

(A), loosening with a wrench if necessary.

6. Remove the flange(B).

7. Install the blade, making sure the cutting teeth

at the top of the blade point toward the front of

the saw. If unsure, refer to Figure 8 for the

proper blade orientation.

8. Replace the flange (B) and arbor nut (A).

9. Engage the arbor lock (D) and tighten the nut

(A) with a wrench.

10. Lower the blade below the table.

Use care when working with or around

sharp saw blade to prevent injury!

To install or replace a blade (refer to Figure 6) :

Tools: 22mm Wrench (10”) 38mm Wrench (Aus12”)

32mm Wrench (12”)

CAUTION

Figure 6

Figure 5

Figure 4

- 16 -

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 47 48

Comentários a estes Manuais

Sem comentários

Axminster TSCE-12R Manual de Instruções Página 16

Comentários a estes Manuais

Manuais e produtos relacionados com Serras circulares Axminster TSCE-12R