Axminster C0 Instruções de Operação descarregar pdf (Página 8)

Assembly

Fig 08

Fig 07

Fence rail “T” slot

Clamping lever

Step 4 Locate the angled bolt (K), screw the

threaded end of the bolt into the threaded hole to

the top of the bandsaw frame and, using the supplied

10mm spanner, tighten with the nut to lock the bolt

in position, see ﬁg 09. Find the push stick (F) and

hook it onto the angled bolt (K), see ﬁg 10.

Step 5 Locate the mitre fence (E) and slide it into the

table’s “T” slot, see ﬁg 11.

Fig 09-10

Fig 11

Table “T” slot

Step 1 Place the bandsaw on a work bench. Mark

the position of the holes in the bandsaws base,

place the bandsaw to one side and drill the holes.

Step 2 Line up the holes and secure the bandsaw in

place with bolts, washers and shake proof nuts.

305mm

250mm

220mm

335mm

4 ø 8.5mm

table. Twist the locking lever clockwise to adjust

the clamping tension.(Two rotations should be

adequate) then press down the lever to lock the

fence in position, see ﬁgs 07-08.

Securing the Bandsaw

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 27 28

Sem comentários

Axminster C0 Instruções de Operação Página 8