Axminster Deluxe Instruções de Operação descarregar pdf (Página 11)

Assembly Instructions

Fig16

Fig 17

Fig 18

Dust extraction outlet

Flexible hose

Rip Fence Assembly

Locate the rip fence (A), rip fence extension (B) with ‘T’

bolts, washers and clamping knobs, fence guide rail (C)

and two M8 x 50 bolts and nuts.

1) Insert the two M8 bolts into the pre-drilled holes to the

side of the main saw table and loosely screw on the nuts.

2) Remove the cover to the end of the fence guide rail (C)

by removing the two Phillips screws, place safely aside,

see ﬁg 19.

3) Line up the ﬁrst bolt head with the ‘T’ slot in the fence

guide rail and slide on the rail, repeat for the remaining

bolt, see ﬁgs 20-21.

Fig 19

Fig 20-21

4) Replace the cover to the end of the guide rail (C)

and secure with the Phillips screws you removed earlier.

Position the rail so it lines up with the edge of the saw

table and only ﬁnger tighten the nuts at this point,

see ﬁg 22.

Fig 22

Continues Over....

End cover

M8X50 Bolt

‘T’ Slot

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 55 56

Sem comentários

Axminster Deluxe Instruções de Operação Página 11