Axminster Deluxe Instruções de Operação descarregar pdf (Página 9)

Assembly Instructions

2) Locate the steel pin plate (A) , line up the pins with the

elongated slots in the extension table (B) and lower the

plate into the table, see ﬁg 4. Locate the two lift and shift

Fig 04

Fig 05

handles and slot them through the two pre-drilled holes

in the extension table (B) and screw them into the

threaded holes in the steel pin plate (A). NOTE: Make

sure to leave sufﬁcient clearance between the steel

plate and the table frame for the next step.

3) Position the extension table (B) against the sliding

table assembly. Line up the steel pin plate (A) with the ‘T’

slot to the end of the sliding table and slide on the exten-

sion table (B), see ﬁg 05.

4) Position the extension table so it’s roughly centred to

the sliding table and tighten the two lift and shift handles

to lock the asssembly in position, see ﬁg 6.

Fig 06

MAKE SURE THE SUPPORT CASTING WHEEL

RUNS SMOOTHLY ALONG THE EXTENSION RAIL!

Lift and shift handle

5) On top of the extension table there are two adjustment

caphead screws, using a straight edge adjust the screws

until both sliding and extension tables are level.

Fig 07-08

Caphead screw

Straight edge

Caphead screw

Sliding Table Fence

Locate the sliding table fence, loosen the angle bracket

clamp by undoing the butterﬂy knob (A), loosen the steel

pin by releasing the clamping handle beneath the fence,

see ﬁg 9. Line up and push the steel pin into one of the

Fig 09

Continues Over....

Steel pin

Clamping handle

Sliding table fence

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 55 56

Sem comentários

Axminster Deluxe Instruções de Operação Página 9