Axminster TS-200 Instruções de Operação descarregar pdf (Página 14)

Assembly

Fig 36

16. Locate the ﬂexible hose (B) and hose clips (G2).

Place a clip over one end of the hose and insert

the hose over the 50mm outlet on the extraction

moulding (C) and tighten the hose clip, see ﬁg 36.

15. Attach the hose support bracket (A4) to the far

corner of the saw table using two cap head screws

and nuts, see ﬁg 34-35.

Fig 34-35

Cap head screws

Hex key

17. Place a clip over the other end of the hose and

introduce the hose over the dust outlet on the crown

guard tighten the hose clip, see ﬁg 37. Lastly hook the

hose over the support bracket (A4), see ﬁg 38.

Fig 37

Fig 38

R/H Extension Table Kit

1. Locate the long rip fence rail (M), long rip fence

(N), long rip fence guide rail (O), extension table (P),

extension table support leg (Q), cap head screws,

(Q1), washers, (Q2) and nuts (Q3).

2. Remove the fence assembly (E), short fence rail (F)

unhook the ﬂexible hose and remove the hose

support bracket (A4) and place safely aside.

3. Remove the ﬁrst three nuts and washer from

the fence rail (M) and place safely aside. Slot the ﬁrst

three threaded bolts in the long fence rail through

the three pre-drilled holes to the front of table and

secure with the washers/nuts and lightly tighten,

see ﬁg 39.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 43 44

Sem comentários

Axminster TS-200 Instruções de Operação Página 14