Axminster TS-200 Instruções de Operação descarregar pdf (Página 15)

Assembly

Fig 39

4. Remove the washers/nuts from the remaining

three bolts and place aside, position the bolts along

the rail, put to hand four cap head screws (Q1) and

washers (Q2), see ﬁ g 40.

5. Slot the three bolts in the fence rail (M) through

the three holes in the extension table (P), see ﬁ g 41

lift up the table (P) and align the four holes to the

side with holes in the saw table and secure using cap

head screws/washers, see ﬁ g 42-43.

Fig 40-41

Fig 42-43

6. Replace the three nuts/washers you removed

earlier from the fence rail (M) and lightly tighten, see

ﬁ g 44.

Fig 44

7. Locate six cap head screws (Q1), nine washers (Q2),

three nuts (Q3), see ﬁ g 45.

Fig 45

Q2 Q1

Continues Over...

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 43 44

Sem comentários

Axminster TS-200 Instruções de Operação Página 15